News Release FOR IMMEDIATE RELEASE Demag Overhead Bridge Crane Kits Allow Quick Installation of 3, 5 and 10 Ton Capacity Overhead Cranes CLEVELAND, OH (May 17, 2011) – Overhead bridge crane kits from Demag are a quick, and cost effective solution for installing overhead bridge cranes in the 3, 5 and 10 ton capacity range. The kits are plug-and-play, require no electrical work, and include everything needed for installation with the exception of box girders or steel beams. Available in either top running or under running configurations, the single girder overhead bridge crane kits include a wire rope hoist, end trucks, a bridge panel, a festoon system with brackets and push button station, specifications and instructions. Steel beams or box girders are typically sourced from a local vendor to save on freight. All components are manufactured and warrantied by Demag. This ensures quick and trouble-free installation, quality, reliability and consistency. Typical installation times have been under 21 hours. While most customers use their own installer, Demag offers complete onsite construction and maintenance service. ### About Demag Cranes and Components Demag Cranes & Components based in Cleveland, OH , a subsidiary of Demag Cranes AG , is a world class manufacturer of high quality industrial cranes and components, electric chain and wire rope hoists, and load handling attachments and accessories for material handling flow, logistics and industrial drive applications. The company offers a complete range of services and support programs including replacement parts, maintenance and refurbishment. |  Click here to access Microsoft Word Document, High Resolution Photo and Low Resolution Photo For more information: Demag Cranes & Components 29201 Aurora Road Cleveland, OH 44139 Fax: (440) 248-3086 www.demag-us.com Client Contact: Mr. Ruedi Van Coppenolle Product Manager Demag Cranes & Components Ruedi.VanCoppenolle@demag-us.com |
Thursday, February 9, 2012
Wire Rope hoist Overhead bridge crane kit
Monday, February 6, 2012
Bridge Cranes, Bridge Crane, Overhead Crane, Wire Rope Hoists, Crane kits
Wednesday, April 13, 2011
Freestanding workstations bridge crane overhead crane with electric chain hoist
Demag KBK system. Freestanding Workstations with
Demag Electric Chain Hoists
Demag Cranes has added the KBK II-H steel profile section, with an inside-running rail component, to its KBK light crane system, enabling the construction of monorails and suspension cranes with capacities up to 2t. The KBK II-H profile section is fully compatible with existing profile sections, rail brackets, trolleys and suspension fittings in the KBK II range, despite an installation height 13mm higher than existing KBK II profile sections.
It retains the same width as KBK II profile sections, and will be compatible with curved sections, track switches, turntables and drop sections via a profile adaptor to be released in mid-2011. One important feature is the completely rigid rail joint: its connections are secured using self-retaining nuts, which allows greater planning freedom during system installation.
As the KBK II-H sections can support a full load regardless of track suspension positioning, crane suspension and track suspension clamps can be fitted at any position. In addition, there is no need to use straight profile sections in specific lengths to accommodate pre-defined distances between suspensions.
With the KBK II-H section larger spans or distances between suspensions can be achieved, with support for loads of up to 1.2t possible even with distances of over 6m between suspensions. With the system’s deadweight to load capacity ratio, additional supporting steelwork can be significantly reduced or even eliminated.
Demag Cranes has also made the new section available with 5-pole conductor rails as the KBK II-H-R, which is intended to replace the existing KBK II-T section.
About Demag Cranes and Components
Demag Cranes & Components based in Cleveland, OH , a subsidiary of Demag Cranes AG , is a world class manufacturer of high quality industrial cranesand components, electric chain and wire rope hoists, and load handling attachments and accessories for material handling flow, logistics and industrial drive applications. The company offers a complete range of services and support programs including replacement parts, maintenance and refurbishment.
For more information:
Demag Cranes & Components
29201 Aurora Road
Cleveland, OH 44139
Fax: (440) 248-3086
Subscribe to:
Posts (Atom)